Skyartec WASP 100 Nano CPX, Brushless, Flybarless, 6CH, 3D R/C Helicopter
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Availability date: 01/01/0100
Thank you for purchasing SKYARTEC WASP NANO CPX Brushless helicopter which is considered high-perfermance,easy control,stable,durable and light weight. WASP NANO CPX adopts with 3-axis gyro system, incredible real-time responding in any 3D stunt flying. Furthermore,it offers good stability and agility with configurating LCD 2.4GHz 7CH radio control , adopt 1410-11000KV Brushless high-powered motor and 12A Brushless Esc .
Main rotor diameter: 240mm
tail rotor diameter: 36mm
motor pinion gear: 8T
Main Drive Gear: 67T
Flying Weight: 48g
5 in 1 receiver board C; 3.7V 240mah LI-PO battery; 1410-11000KV brushless motor; tail motor; 2g servo(5 lines)x3; 12A brushless Esc; USB charger cable; USB power supply; special screw driver; SKYARTEC CD; NASA701 LCD 2.4GHz 7ch TX.
1. All signal wire connectors must be connected correct as required, otherwise will result failure of receiving remote signal, even receiver burnt and so on serious consequences.
2. To avoid the knob broken, it needs to use the special configured adjust pen when adjusting all knobs.
3. When code-pairing, helicopter must be satic placed horizontal position.
4. When boot should follow the principle of ¡°turn on the transmitter first then power on the plane¡±. After turn on the transmitter, power on the plane within 10 seconds, receiver¡¯s indicator light start flashing slow about 1~3 seconds, which means it is receiving the signal.If the light not on, it means receiving no signal, code-pairing is needed. Indicator light flash fast after receiving signal, which means the gyro is initializing. If the red light turn to constant light, and sound the mechanical voice of servo reset, which means the receiver start to work.
|Main Rotor Diameter||240mm|
|Weight (incl. Std Battery)||48gr|
|Tail Rotor Diameter||36mm|
|Motor pinion gear||8T|
|Main Drive Gear||67T|
|Flying Time||Up to 8mins|
|Std Battery||3.7V 240mAh LI-PO|
|Remote Range||Up to 100m|
|Main Motor||Brushless Motor|