The FPV FreeX comes in an optional stunning aluminum box with an extendable pull handle for easy transport (Basic Version is gift box). On unpacking, all of the components come in their own protective compartment. These include a SkyRc E4 balance charger, USB cable for the firmware updates, propellers, various tools and a high powered 11.1v 5400Mah LiPo battery for a longer flight time even with the extra weight of the gimbal and camera.
(XIOMI CAMERA INCLUDED)
The gimbal that comes pre-attached to the quadcopter is a 2 Axis full CNC brushless gimbal. It supports most small cameras including the SJ4000 cameras and the GoPro 3 upwards (please note that the camera is not included with the quadcopter). The camera is so very easy to attach – just loosen the 2 Allen key screws, slide the bar, fit the camera, tighten the screws, plug in and away you go!
(XIOMI CAMERA INCLUDED)
Turning the quadcopter on, we are met with the flashing lights under the propeller arms, the usual 2 lights – indicating you are pointing north and that you are connected to the GPS. The gimbal comes to life and a quick click of the button on the gimbal and it is collaborated and is ready to shoot.
(XIOMI CAMERA INCLUDED)
The gimbal that comes pre-attached to the quadcopter is a 2 Axis full CNC brushless gimbal. It supports most small cameras including the SJ cameras that we sell and the GoPro 3 upwards (please note that the camera is not included with the quadcopter). The camera is so very easy to attach – just loosen the 2 Allen key screws, slide the bar, fit the camera, tighten the screws, plug in and away you go
(XIOMI CAMERA INCLUDED).
Now to the next most important component - the awesome 2.4G 11 CH LCD FPV Transmitter w/ Video Recorder Monitor Mini HD DVR Wireless RC Receiver AV-IN and AV-OUT, built-in 5.8Ghz video receiver.
With the transmitter you are able to control the gimbal with the circular pad enabling you to take photos and videos from better angles. Other features include headless mode capabilities, being able to support a memory card of up to 32GB so that you can store the video footage and the ability to take videos and take photographs at a flick of a switch.
On the awesome OSD LCD display screen, it tells you an abundance of information including; flight time, distance flown, speed, current height, direction and longitude and latitude!!

- Main Feathers:
- 1. The motors will be shut off automatically if the FreeX doesn't take off after started the motors in 10 seconds;
- 2. The FreeX will be forced into manual if there is no GPS signal during flight;
- 3. The stick will be centered and FreeX will be switched to RTH (Return to Home) mode if the receiver lines are unplugged;
- 4. There is a software can be installed in computer to check the parameters and know why the freeX flying was not right.
- 5. Auto-return if battery less than 10.7v, and auto-landing if battery less than 10.2v during the flight. To keep the freeX safe and avoid crashes.
- 6. Transmitter can be changed between mode 1 and 2 very easily.
- 7. Auto Return to Home (RTH) function
- 8.Intelligent Orientation Control
- 9.GPS Position Hold: When the right Green LED is flashing (meaning you have all satellites locked) you can flip the flight mode switch to GPS (center position) and quadcopter will hold its position once all sticks are centered.
Specifications:
Width & Length: | 280mm | Motor: | 2212-1050KV Brushless Motor |
Height: | 210mm | ESC: | 15AX Brushless ESC |
Diagonal base: | 396mm | Receiver: | Free X Receiver |
Propeller Size: | Standard 9 inch (Supports upto 10 inch Propeller) | Battery: | 11.1V 5400mAh Lithium Polymer |
Flight Endurance: | About 16 minutes with standard 11.1v 5400mAh Battery (including Camera and Gimbal) | Fight Control Board: | FreeX Onetouch 4 and UAV Grade FREE-X GPS module |
Weight: | 1320g (Include the battery, gimbal and Camera) | Transmitter: | freeX FPV transmitter with LCD Display |
Parameters | 2.4G Transmitter Specifications |
Max Rudder Angle Speed: | 150 °/s | Transmission Frequency: | 2.4GHz Hopping 11CH Transmitter |
Max Angle of Inclination: | 45° | Output Power: | < 100mW |
Max Lifting Speed: | 3.5m/s | Current Consumption: | < 230mA (100mWh) |
Max Flight Speed: | ≤30km/h | Output Pulse: | 1000-2000mS (SUB TRIM is 1500) |
| | Control Distance (Outdoor/no stop) | 1km |
SkyRc E4Charger | 5.8G Video Tx and Rx |
Input Voltage: | 100-240V | Transmission Frequency: | 5.8G |
Output Current: | 1A / /2A / 3A | Output Power: | 600mW |
Compatibility: | 7.4V / 11.1V / 14.8 | Receiver: | 32CH |
| | Control Distance (Outdoor/no stop): | 2km |
LCD Display Specifications (4.2 inch) |
Resolution: | 480 (H) × 640 (V) | Viewing Angles (Up/Down/Left/Right): | 50/65/60/60 |
Back Light: | LED (5Pcs) | Luminance: | <300LUX |
Dimension: | 95 (W) mm × 55 (H) mm | OperatingTemperature: | -20℃~+70℃ |
Overall Dimension: | 105.5 (W) mm × 65 (H) mm× 15(D) mm | | |
Mother Board Specifications |
System Format: | PAL/NTSC | Voltage Input: | DC 6V -12V |
Size | 84.5 (W) m m× 63.2 (H) m m× 7.2 (D) m m | Video Input: |